Posted on May 5, 2022
Low-phase noise oscillator composed of a dielectric puck with a resonance frequency of 4.5 GHz (botttom right) and a balanced amplifier (top). The oscillator can be locked to an external reference by applying the reference signal to the integrated analog phase-shifter (bottom left).
Read MorePosted on September 19, 2021
Generative microwave filter design by using a particle swarm optimization to find a layout for a compact 4 GHz low-pass filter based on FEM simulations of the structure.
Read MorePosted on September 3, 2021
A non-linear transmission line composed of varactor diodes and inductors. The transmission line can be matched to 50 Ω by applying a DC-bais. Such a device can be used as a frequency comb generator, as a broadband microwave phase shifter, or to study non-linear physics phenomena.
Read MorePosted on March 23, 2020
A phased-array radar system operating at 6 GHz with one transmitter and two reciever channels. The radar modulation scheme is FMCW implemented with a custom PLL chip set. The processing of the radar signals is carried out on an Analog Devices ADSP-BF531.
Read MorePosted on January 17, 2018
Simple USB Spectrumanalyzer for signals from 100 MHz to 6 GHz using an active mixer with an integrated wideband PLL and a Xilinx FPGA for digital Signal Processing.
Read MorePosted on July 09, 2017
Layout revision of the Dual Source v1, with a new microprocessor and an additional external clock input for PLL synchronization. Improved RF-shielding and design of an aluminium case.
Read MorePosted on April 28, 2017
This versions features two synced RF sources with programmable phase shift (0.01° resolution) and additional differential outputs. Each RF source can also be programmed independently in frequency and amplitude. The frequency range of the outputs is 100 MHz to 6 GHz.
Read MorePosted on April 26, 2017
A simple low-cost programmable microwave source for signals from 100 MHz to 6 GHz. The output power is adjustable from -35 to 10 dBm and a on-board leveling is possible with a microwave power detector. Communication to a PC can be established over the USB port.
Read MoreThis webpage reports on my personal electronic hardware design projects, which I have carried out in the past few years. Projects include microwave sources, RF measurement equipment, RF filters, radar systems, and many more ...